Description: Description: Product includs: 3-Rubber Paddle 3-Metal Straps 9-Bolts & Lock Nuts 3-Self-tapping Screws; Rubber Paddle 1/4" thick(2"W x 5"L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75; Metal Strap with holes - 1 3/8" W x 3 3/4"L , 1/16" thick Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling. Doesn't fit Ariens with curved impellers This kit is to reduce the existing“gap”between the snow blower's impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine's operational efficiency and snow throwing Description: Product includs:3-Rubber Paddle 3-Metal Straps 9-Bolts & Lock Nuts 3-Self-tapping Screws; Rubber Paddle 1/4" thick(2"W x 5"L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75; Metal Strap with holes - 1 3/8" W x 3 3/4"L , 1/16" thickBolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2" wrench & socket) ; Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling. (Doesn't fit Ariens with curved impellers) This kit is to reduce the existing“gap”between the snow blower's impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine's operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow. This "gap" allows snow and slush to slip by the blades and build up around the impeller and in the discharge chute clogging it. This gap also decreases the efficiency of the impeller's ability to propel the snow up the chute resulting in less throwing distance. This problem is well known to people with two-stage snow blowers, and the easy and the quick, inexpensive fix is to modify the impeller blades by adding a strip of reinforced rubber to each one of them to eliminate this gap. It is HIGHLY recommended that you install one kit on each blade however, because only modifying some but not all of the blades will cause a harmonic imbalance in the spinning impeller which could easily cause excessive wear on the impeller shaft bearing resulting in very costly repairs! If you have a single-stage snow blower, or your gap is less than 1/4" or greater than 5/8", you probably don't need or can't use this fix.Depending on how handy you are, this kit can be installed in 1-2 hours without too much difficulty! NOTE: If the gap varies around the chamber wall, you MUST install the rubber to fit the spot where the gap is the smallest, otherwise, the rubber will fail!The rubber paddles mounted should be installed so they are barely touching. Remember, ANY decrease in the gap between the impeller blades and the chamber wall will result in a significant improvement in operational efficiency and throwing distance! Only Need 1 Set? Click Here! Click Here to Get 4 Pack with Better Price! Click Here to Get 5 Pack With Good Price! Click Here to Get 6 Pack With Great Price! Only Need Rubber Paddle? Click Here! Any question? Please feel free to message me. OUR PLEDGE TO YOU:30-Day Money Back Satisfaction Guarantee!Fit and Function Guarantee！Fast & Free Shipping! (Except Alaska & Hawaii)Buy with confidence！ Have questions? Send us a message with your model number and spec number and we would be happy to confirm compatibility! Many replacement parts should be installed only by a professional.If you are not qualified to install this item, you are more than welcome to email us, and we will help with return process. Please verify it is the correct part number and model for you before bidding, because it will be buyer's responsibility if purchase the wrong parts. Please feel free to message us if you are not sure the compatibility, we will be more than happy to help.
Price: 19.75 USD
Location: Houston, Texas
End Time: 2023-12-20T09:23:52.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Universal
Battery Included: No
Custom Bundle: No
Item Height: See Listing
Item Width: See Listing
Assembly Required: No
Power Source: Gas
Type: Two/Three Stage
Color: Black
MPN: Does Not Apply
Item Length: See Listing
Brand: haiouus
Number in Pack: 3 Pack
Items Included: See Listing
Note: Doesn't fit Ariens with curved impellers
