AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350

Description: AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank #30-3350 BRAND NEW IN BOX <<<<<<<<<<<<<<<< IN STOCK >>>>>>>>>>>>>>>>> THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGE Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing—without using high-octane racing fuel—for power gains of up to 20%. AEM’s Water/Methanol Injection Systems utilize the most robust hardware combined with more advanced features than any other comparably priced water/methanol system.Water/Methanol for All Boost Levels of Forced Induction Gas Race Engines AEM offers two different water/methanol controller designs for gas vehicles:One is boost dependent for forced induction vehicles up to 35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup.The second controller (Kit PN 30-3350) features a multiple input design that enables users to install AEM’s Water/Methanol Injection Kit on ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based external MAP sensor. Robust, Easy to Use Controller DesignsThe new controller designs (Boost Dependent Kit PN 30-3300 & Multi Input Kit PN 30-3350) feature large, turn-resistant knobs and larger numbering to easily set accurate start and full activation points, with covered status LED and test buttons for added splash resistance. A plug is integrated into the controller housing for mating to the redesigned wiring harness’s positive-lock connector. The Boost Dependent controller housing has a molded-in, barbed nipple to accept a boost hose and a wiring legend on the back. Both controller housings feature an easy to access integrated fuse and molded mounting tabs. Simplified WiringAEM’s Water/Methanol Injection kit’s wiring harness is terminated with a positive-lock connector on one end and has color-coded wires to ease installation. Both the power and ground wires for the pump are included in the harness which simplifies the wiring process and eliminates any chance of the pump accidentally activating from a short in the system. An additional wire is included for adding an optional on/off solenoid to stop fluid flow when the system is inactive. Integrated Boost Safe FeatureThe controllers in AEM’s Water Methanol systems include an integrated “Boost Safe” output feature that monitors the entire injection system and triggers a ground signal via an output if it detects a voltage-related error (short, bad connection, broken wire, overheated pump, high or low voltage signal, etc.), allowing users to define their failsafe strategy from something as simple as flashing a warning light to more advanced strategies like pulling boost or ignition, or switching fuel maps on a standalone engine management system. Combined with the integral and highly accurate conductive low-fluid switch in the tank, “Boost Safe” can also put your engine in safe mode before the system runs dry. This exclusive feature is found only on AEM Water/Methanol Injection Systems. Heavy-Duty High Pressure Injection PumpAEM’s internally-bypassed water/methanol injection pump does not cycle on and off and provides quiet, smooth operation. It features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery. Low-Profile 1 Gallon TankAEM’s gas Water/Methanol Injection Systems are available with or without a compact 1 gallon tank. A more accurate, conductive low level fluid sensor is integrated into the tank and features a positive lock connector with color-matched wires to the wiring harness. The sensor eliminates any chance of incorrect readings due to interference from debris. Machined Billet Injectors and NozzlesAEM includes one precision-machined billet injector in its gasoline Water/Methanol Injection kit. It features an integral check valve to prevent unintended fluid flow. Three billet injector nozzles are included for matching water/methanol flow to an engine’s horsepower output. Revised Flow Control Strategy for More Linear Fluid DeliveryAEM’s engineers spent extensive time revamping the controller’s flow control strategy for a more linear flow output delivery. This means that the flow delivery better matches an engine’s need for water/methanol injection, which further optimizes charge air cooling and detonation control. Boost Dependent and Multi-Input (0-5v/frequency) progressive controller designs feature large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, integrated pump ground circuit and additional wire for optional on/off fluid solenoid “Boost Safe” failsafe output included (for complete failsafe under all conditions, see our Water/Methanol Failsafe Device)Heavy-duty high-pressure injection pump features integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pump maximizes line pressure for optimum atomization and its quiet, smooth operation is almost undetectablePrecision-machined billet-aluminum injector with integral check valveThree interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)1 gallon tank with integral conductive low-fluid sensor and positive lock connector (tank-less systems available)20 feet of injection tubing includedLED dash light for system status and low fluid warning WATER/METHANOL INJECTION ADVANTAGES FOR GAS ENGINES Reduces Air Inlet Charge Temps The term “liquid intercooling” with water/methanol injection refers to a highly atomized mist of water/methanol that is injected into the airstream and begins to evaporate. As it does, this evaporative effect reduces air charge temps by as much as 100 degrees, and delivers a more oxygen-rich air charge. Reduces Detonation (Knock) Water absorbs heat, and methanol is a cool burning, anti-knock rated fuel. When combined and introduced into the inlet stream, they can effectively increase your vehicle’s anti-knock index so you can reliably increase boost pressure and advance ignition timing using pump gas. Reduces Carbon Deposits Modern vehicles fitted with Exhaust Gas Recirculation (EGR) devices for emissions control promote heavy carbon build up inside the air intake. This carbon build-up can create ‘hot spots’ in the combustion chambers that can cause detonation. Water/methanol injection has a ‘steam cleaning’ effect that reduces this carbon build up, and in some cases can increase fuel economy. **Generic Photo.Actual product may vary.** Free Shipping most of our items..Check our Store to see all the inventory on ebay! Mom of 2, hard working, innovative and perfection addict. We provide the best customer service in the market for all car enthusiasts. Please do not hesitate to get in touch with us for all your parts needs. Thank you for shopping with us! We require that all payments be paid through PayPal. Your address must be confirmed. We always look to satisfy our customers in whatever needs they may have. Please contact us if you have any questions. International Buyers, please contact us before bidding to discuss the shipping cost. Shipping charges are non-refundable. We always look to satisfy our customers in whatever needs they may have. Please contact us if you have any questions.. Please contact us if you have any questions. After receiving the item, contact seller within 30 days Refund will be given as Money back or replacement (buyer's choice) Buyer pays for return shipping. Refer to eBay Return policy for more details. You are covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. We ship with FEDEX/UPS/USPS ground service unless instructed to do differently. We also offer expedited shipping at an extra cost. International shipping rate applies to addresses in all other locations Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer. Item ships within one business day after the payment has cleared or same day if paid by 12pm PST. Item is in stock ready to ship. Item purchased is shipped from San Diego or East Coast Warehouse. Local pickups are welcome for this item. We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information. We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers. Shipping charges are non-refundable. We will gladly combine shipping charges to one charged based on the total weight of the package. There's a surcharge for shipping to USPS PO Box and AF/APO boxes, please contact prior to purchase to check shipping fees.

Price: 481.95 USD

Location: La Jolla, California

End Time: 2025-02-04T17:07:22.000Z

Shipping Cost: 0 USD