Audiopile Extra Deep Rack Case With Slant Top Mixer Rails, Table Top Lids M32R

Description: Used item in fantastic condition. Used ~a dozen times.Rack case only of course. No gear included. I will drive this to you up to 150 miles from Dallas, TX. This is the EWI Tourcase tm Model CUDJ-P-22M-D5 rack cases which have ratcheting mixer rails mounted at the top of the case and an extra deep 22" rack depth measured from the front rack rails to the rear rack rails. These cases also feature extra deep, tabletop doors to allow mixers like the Midas M32R to remain connected to equipment while transporting.The slant mixer mounting portion of the CUDJ-P-22M-D5 series cases is designed to accommodate mixers with a rack mount requirement of up to 12U (21"). A longer front to back mixer of up to 24" is possible to mount in this case by extending a portion of the mixer into the front and back lids; however, the mixer rack rails are 21" long. The slant mixer rails are supported at the back with a ratcheting tilt mechanism which allows the mixer to be lowered into the case for transport and raised to horizontal for use.The CUDJ-P-22M-D5 series cases build on the success of the CU-P-22M series with the added feature of attaching the removable doors to the sides of the case to form a tabletop on both sides of the case. The doors house the steel table legs which fold flat when transporting. The tabletop doors attach to the sides of the case with two heavy duty latches that mate with two heavy duty hooks on the side of the case. With both tables attached on the C12UDJ-P-22M-D5, the overall width of the case is 88 3/4" with a tabletop height of 31 1/4".The front equipment rack rails of the CUDJ-P-22M-D5 cases are actually two spaces longer than the model number implies. Depending on your mixer height when laid flat or horizontal in the slant top portion of the rack you may or may not be able to use this extra rack space for racking other equipment. If your mixer extends down into this space when laid flat you will still have the full use of the rated rack space. Please note: The supplied panel blanks or a piece of rack equipment must be installed in the front and back rails at all times to provide rigidity to the case.The CUDJ-P-22M-D5 series side panels are constructed with 3/8 inch hardwood plywood and covered with a black ABS laminate finish. The extrusion is all aluminum and the case is assembled with aluminum rivets. The rivets on the 4 recessed padded flip handles are backed with washers to ensure strength and durability. The cases roll on 4 heavy duty 4" swivel casters, two of which are braking style. The casters are shipped un-mounted with all mounting hardware included.The CUDJ-P-22M-D5 series cases are equipped with 3 lids: front, back, and top. The lids are secured to the case using 4 recessed butterfly latches per lid and the top lid is secured between the front and back lids. Each lid has four heavy duty ball corners and the inside of the CUDJ-P-22M-D5 series lids are fully padded with medium density foam rubber.These are well made heavy duty cases manufactured to exacting tolerances and suitable for a variety of deep racking applications.

Price: 499.99 USD

Location: Lewisville, Texas

End Time: 2025-01-24T16:12:57.000Z

Shipping Cost: N/A USD