Description: Safe for handling propane and butane (Vent port must be connected to an exhaust line that vents leaked gas outdoors) Viton and PTFE seals Stainless steel and aluminum wetted components High butane transfer rates No electrical components Stall against load - start against load - or run dry Requires compressed air to drive the pump - approximately 30 CFM at 100 psi (7 bar) to run the pump at maximum speed (about 60 cycles per minute) Clean No lubrication required in the gas section - Nothing is added to the gas Proper operation of the BHOgart pump will require the following additional equipment: Compressed air source capable of providing approximately 25 CFM of air at 90 psi (6.2 bar) or higher (Compressor must be located in an area away from the LPG gasses) Compressed air filter filtering to 40 microns or better Drive air pressure regulator Drive air speed control valve - such as a gate valve or a globe valve (not a ball valve) Single stage Ideal when inlet pressures are 25 to 50 psi (1.7 to 3.4 bar) and outlet pressures are 125 to 150 psi (8.6 to 10.3 bar) Pump will transfer approximately lb/min with an inlet pressure of 50 psi (3.4 bar) and an outlet pressure of 150 psl (10.3 bar) at maximum speed Will draw pressure down to 15 psi (1 bar) with an outlet pressure of 150 psi (10.3 bar)
Price: 275 USD
Location: Klamath Falls, Oregon
End Time: 2024-11-18T16:44:40.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: bhogart
