Description: The most important part to building the Tonka Winnebago into an RC is the chassis that your components attach to. ECB 3D Printing has done the math and hard part and designed a modular system that allows you to add what you need and not pay for what you do not. The Rear Bag Chassis combines the suspension for the rear axle and a mount for a planetary transmission. The Rear axle suspension parts are for a 1/14 tractor semi axle. The axle, suspension and planetary transmission can be found from various sellers on ebay. This bag system has advantages over leaf spring. It does not have spring wrap that happens under heavy load and it does not give you a random axle centerline like the cheap leaf springs. The bag system has a set length to center your axle in the wheel well (we did the hard part with our chassis) and you do not need to adjust spring mounting points due to random length and random spring load of cheap leaf springs. The axle and transmission we used has 5mm drive pins so we used a simple coupler with 5mm holes as a driveshaft. This can also be found from various sellers on ebay. This chassis unit needs 4x m3 lock nuts to attach to the Winnebago. *Tech Tip : When tightening down the mounting screws to the planetary transmission, compress the axle to make sure the coupler does not bind. Only the Printed parts come in these units (2 stops and battery strap comes with the electronics tray). The screws and metal parts are not included. All parts come in black and you can easily paint them to match your RV. For more options please visit our new website www.ecb3dprinting.com or follow us on Facebook "ECB 3D Printing 2.0" and Instagram "ECB 3D Printing" or YouTube "The Budki".
Price: 24.98 USD
Location: Hamburg, New York
End Time: 2024-12-03T17:25:30.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: ECB 3D Printing
MPN: ECB222
