Description: Hot sellingFor 2011-2013 Ford Explorer AWD Pair Front Quick Complete Struts Spring & MountUSD142.00Pair For Ford Freestyle 2005 2006 2007 Front Complete Shock Struts Coil SpringsUSD119.00Pair (2) Front Struts Coil Spring For 2013 2014 2015 2016 2017 Honda Accord 2.4LUSD121.144x Front & Rear Complete Struts Shock Absorbers For 07-16 Jeep Patriot CompassUSD202.00Fit for 2001-05 Hyundai Santa Fe 2.4L 2.7L 3.5L 2X Rear Struts Shock AbsorberUSD47.38Specifications:CU1193 Aluminum Radiator Fit 91-01 Jeep Cherokee XJ 91-92 Comanche 2.5 L4 4.0 L6 Specifications: 1. Condition：100% Brand New2. Color：As shown in the figure3. Part Number：CU1193 41-1193A 1193 4. Brand：KAC5. Warranty：Lifetime Description General Information: Lifetime Warranty Top U.S Seller 60 days free return period No restocking fees All products are quality inspected & 100% leak tested Drop in - direct fit for easy installation OE specification Highest grade plastic, aluminum used in our manufacturing process Fitment:MakeModelYearNotesPositionJeepCherokee1991 - 19934.0L | Except Post Office Vehicle | Left Hand DriveN/AJeepCherokee1994 - 19974.0L | Left Hand DriveN/AJeepCherokee1998 - 2001Left Hand DriveN/AJeepComanche1991 - 19924.0L | Except Post Office Vehicle | Left Hand DriveN/A Advantage: -OE design to ensure exact fit, form and function for an easy drop-in installation; -Built with high density multi-lowered fins for maximum cooling efficiency; -Direct Replacement; -Improve Cooling Efficiency; -100% Leak Tested; -Plastic tanks with aluminum core; -Built to strict quality control standards; How to clean radiator: 1. Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake from the tank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system. 2. After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification. How to replace the radiator: 1. Disconnect the battery. 2. Drain the radiator fluid into a suitable container. 3. Remove the old radiator: -Take off any plastic covers around the radiator. -Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly. -Disconnect the radiator hoses from the radiator. -Disconnect the transmission cooling lines from the bottom of the radiator. -Remove any clamps, brackets, or screws holding the radiator inside its frame. -Lift the radiator up and out of the car. 4. Install the new radiator: -Slide the new radiator into place. -Connect any clamps or brackets that hold the radiator in place. -Connect the transmission cooling lines carefully. -Connect the engine cooling hoses to the radiator. -Replace the fan and fan shroud. -Reconnect the fan electrical connection. -Replace the plastic covers. 5. Fill the radiator with fluid. 6. Check your work to make sure that there are no leaks. (Tools need to be prepared: Screwdrivers, Wrenches, Drain pan) Note: Do please keep children and pets away when replacing the radiator) Note: 1.It will be better if you can check with the above chart to make sure if this radiator will fit your vehicle.2. The radiator cap that has not passed the test can't release the pressure when it reaches the pressure value.3. The damaged thermostat is unable to carry out a large cycle, resulting in a continuous increase in the radiator pressure.4. The radiator fan does not turn, resulting in high temperature in the water tank.5. After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.6. Before you start up your vehicle, please make sure there is coolant in the radiator. FEATURES: 1. The Core was made from high quality Aluminum. Effective Heat Dissipation. 2. Good sealing. All of the new radiators will be inspected before selling (including 100% leaking test). 3. Direct Replacement, easy to be installed. 4. Radiator is really easy to get damaged during delivery. We have upgraded our package design to avoid this kind of problem. Item Description:100% Brand New in Box With Customized Packaging, Never Been Installed Before OE Design For Direct Fit, Form And Function For An Simple And Fast Installation Built With High Density Multi-Lowered Fins For Maximum Cooling Efficiency Gasket And O-Rings Are Thermal Shocked To Ensure Durability in Extreme Cold Weather Every Radiator is Subjected To An Aging and Endurance Test in Order To Validate its Performance Under Extreme Weather Conditions Engineered To Stringent Tolerances Designed By Manufacturer's in House Engineering Team To Ensure Perfect Performance No Other Hardware or Accessories Included With Radiator, No Radiator Cap Too, Please Apply Original One if That is Still in Prefect Condition No Installation Guide or Instruction Included, Professional Installation is Highly Recommended Package includes1x Radiator(As shown in the picture)Note:★eBay compatible list can not show up all car model, and sometimes it may have mistake, and may not 100% accurate or out of date.★Please check the manul of your vechicle and choose the correct Good.★If you are not sure the which socket your vehicle need.★Please send us your car make, model, year and other information,we will help to check which you need.★If you have any questions, please do contact us.Thank you! Item SpecificsBrandKACManufacturer Part NumberSS800519ColorSilverCore Height31.13 In. / 790.7 mmCore MaterialAluminumCore Thickness1 In. / 25.4 mmCore Width10.56 In. / 790.7 mmFitment Typedirect replacementHardware IncludedOil Cooler FittingsHas Engine Oil CoolerNoInlet Diameter1.25 in. / 31.8 mmInlet Header11.44 x 2.81 in. / 290.5 x 71.4 mmInlet LocationTop RightISO SpecificationISO 16949Items IncludedN/AMaterialAluminum, PlasticMounting Hardware IncludedNoOutlet Diameter1.56 in. / 39.6 mmOutlet Header11.44 x 2.81 in. / 290.5 x 71.4 mmOutlet LocationBottom LeftRadiator CapNoRow Count1 RowSensor2StyleCrossflowTank MaterialPlasticTransmission Oil CoolerYesTransmission TypeAutomatic or Manual TransmissionTypeRadiatorPlacement on VehicleEngine CompartmentManufacturer WarrantyLifetimeInterchange Part NumberCU1193 41-1193A 1193 1994 1995 1996 1997 1998 1999 2000 2001 JeepCalifornia Proposition 65Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.govFitmentVerify this part fits your vehicle using the compatibility chartUPC997750800519Features 1DURABLE & BRAND NEWFeatures 2US WAREHOUSEFeatures 3FAST & FREE SHIPPINGFeatures 4LIFETIME WARRANTYMPNSS800519 Payment PayPal only! 1.We only accept Paypal. 2.We send all the items are based on your paypal address. 3.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.Shipping We only ship this item to United States ! 1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number. 2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days. 4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible. 5. We are located in areas such as NJ, CA, TX, etc. Returns If you send email to us,In our working hours will be resumed within 48 hours. Please feel free to contact us if you have any questions: Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store. * (1)Not receive in time;* (2)Item broken;* (3)Not satisfied with the item...Contact UsContact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please! ❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!✅(YES) Please give us Five-star! Have Question or Problem??Step 1: Contact sellerStep 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!Step 3: Describe your question clearly; we will give you the best solutionFive-StarPlease leave five stars positive feedback positive comment and Five-Stars. * We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction! * Feedback is very important to us. * We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction. * If we don't understand these problems, we won't be able to solve them! * After understanding the problem, we will be able to give you a satisfactory answer!It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service! Your comment is very important in our business success DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT USHot Item Excellent Delivery Help & Info✔️Lifetime Warranty✔️✔️USA Inventory✔️✔️Free Shipping✔️✔️Fast Shipping✔️✔️High-Quality✔️New List Item Shop Category Store Home Front Pair Quick Complete Strut & Spring Assemblies for 2013-2019 Ford Taurus V6 Introductions:Absorber is mainly used to suppress the shock and impact from the road after suction rebound. This Iron Shock Absorber is doing well in this field. In the most of car suspension system with shock absorbers, to accelerate the frame and body vibration attenuation, and improve the riding comfort of cars. It can also protect you safety from injured. The quality of it is very good, so you don't worry about to change it. Why not take a try for it?Features:1. It is made of iron material that does not contain any ordinary rubber2. Endure high and low temperature, large temperature difference, high vacuum, strong radiation and corrosive environment.3. High bearing capacity and the resistance to fatigue, aging, service life and long storage time.4. Its performance index is can be designed5. Can meet the damping, vibration, sealing, filter, throttle and acoustic noise reduction requirementsFEATURES:Ready To Install: The KAX complete struts assembly includes all the components required for a strut replacement in a single. No Spring Compressor Required! Save you 70% of installation time Recover 100% Performance: Worn out struts add 20% to the vehicle’s stopping distance. after replacing KAX struts assembly, shorten the braking distance, and increase the safety distance. Improve steering response, reduce stopping distance and give you more confidence in driving Increase Tire Grip: By increasing the spring stiffness coefficient, the rapid vibration of the wheel is suppressed, the tire is prevented from leaving the road, and the exercise stability is improved Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy Feature:Brand NewStock parts direct replacementEasy installationSurface Finish: BlackPart Numbers: 172653 172654Front Struts & Coil Spring Assembly Kit Includes: 1x Front Strut & Coil Spring Assembly - Driver Side - 172653 1x Front Strut & Coil Spring Assembly - Passenger Side - 172654 FITS MAKE MODEL YEAR RANGE SPECIFIC DETAILSFor ford TAURUS 2013 - 2019 Limited, SE, SEL; 3.5LPackage Includes:(As shown in the figure)KAX complete struts assembly Features:Upper Strut Mount: Superior premium-style bearings.SAE-grade nuts and bolts.Superior rubber-to-steel bonding.All components manufactured to meet Superior performance.Hollow Bumper: The premium bumper prevents component damage when the suspension bottoms out.Coil Spring: Manufactured with high-quality steel, each coil spring is precisely calibrated to support the vehicle's weight and help ensure correct ride height. Upper Spring Seat: The upper spring seat provides consistent performance without transmitting noise or vibration into the chassis. Also supports the vehicle's weight and helps properly offset the spring in the strut tower.Strut Dust Boot: The durable strut boot protects the strut rod and seal from dirt and debris.Lower Spring Isolators: Prevents metal to metal contact and helps eliminate noise between the spring and spring seat.NEW Premium Strut: Premium strut technology based on application For . Each strut features application For-engineered valving to complement each vehicle's unique ride and handling characteristics.How to Install:Step 1: Before You Lift the Vehicle, Loosen Lug Nuts One Full Turn.Step 2: Jack up Vehicle and Use Jack Stands for Safety & Remove the Tire from the Rotor.Step 3: (Wheel Alignment Is Necessary After Strut Replacement.) Marking the Position of All the Bolts Will Help Keep the Alignment Close to Original and save Time Aligning. Use a Colored Pencil to Mark the Old Strut on the Bolt.Step 4: Use Penetrating Oil (Such As Wd40) to Coat Any Rusted Fasteners, Let Soak for Approximately 1 Hour.Step 5: (Optional) While Waiting for Oil to Soak, Take This Time to Inspect All Other Components That May Need Replacement (Brake Pads, Rotors, Brake Hoses, Ball Joints, Cv Boots, Tie Rod Ends, Bushings, Sway Bars, Etc).Step 6: Remove Any Brake Line or Wire Attachments from the Strut Body. Do Not Disconnect Brake Lines (If Possible)! Opening Brake Lines Will Require Bleeding of the Brake System.Use Extreme Caution When Removing Brake Lines from Your Struts, As Any Damage to Your Brake Line Can Result in Expensive and Time Consuming Repairs.Step 7: Remove Sway bar Attached to the Strut Assembly or Control Arm.Step 8: Remove the Tie Rod (Only If It Attached to the Body of the Strut, If Not Leave It Attached to the Steering Knuckle).Step 9: Remove the Strut to Knuckle Bolts at the Bottom of the Strut. on some Vehicles, the Brake Caliper and Rotor May Need to Be Removed to Gain Access.Step 10: Remove the Upper Mounting Plate Bolts Located in the Engine or Trunk Compartment. Do Not Remove the Center Retaining Nut! It Is Not Safe to Unload the Spring from the Assembly in This Position.Step 11: Carefully Remove the Old Strut Assembly from the Vehicle. Be Very Cautious Not to Let the Strut "Drop" down on Your Brake Line, Rotor or Drum.Step 12: Install the New Complete Strut Assembly in the Reverse Order As Above (Steps 11-6). Using an Anti-seize Compound on All Fasteners Is Suggested.Step 13: Carefully Double Check Your Work and Make Sure Everything Is Tightened to Manufacturers Torque Specifications.Step 14: Replace the Tire the Rotor and Tighten to Manufacturers Torque Specifications.Step 15: Slowly Lower the Vehicle down After Removing the Jack Stands. Pay Very Close Attention to Any Odd Sounds When the Vehicle Is Lowered Onto the New Complete Strut Assemblies.Step 16: It Is Very Important That You Immediately "Road Test" Your Vehicle Right Away to Ensure That Installation Was Done Properly. Listen and Feel for Common Signs of Incorrect Installation While Driving Slowly over Speed Bumps, Rough Road or Potholes.Fault inspection of shock absorber :When the car is on a bumpy road,the shock absorber will make a "click" or "creak" sound when it is bumpy. When the car is running at a slow speed and the emergency brake is applied, if teh car vibrates violently and the shock absorber leaks oil, it indicates that the shock absorber is broken and needs to be replaced. 1、Check the appearance of the shock absorber for signs of oil leakage.You can press the four corners of the car by hand to check whether the car body bounce has abnormal sound. 2、Stop the car after driving 10 km on the road with poor conditions, and touch the shock absorber shell by hand. If the shell is hot, it means that the shock absorber is short of oil, otherwise it means that shock absorber is broken. 3、Stand at the position of the shock absorber and press the car body with force. If the car jumps on more than once or twice, it means it working well. If the car keeps nodding up and down and the car body swings up and down more than three times, the shock absorber is broken.Hazard of broken shock absorber ⇢ DANGERS！⇢ 1、If the shock absorber is not replaced due to oil leakage, the shock absorption effect of the vehicle will be reduced after long-term driving, causing the vehicle to make abnormal noise when driving to the bumpy road section, damaging the whole suspesion and causing the suspension deformation. 2、The oil leakage of shock absorber will cause uneven force on both sides of the tire, resulting in the obstruction of vehicle control, and the long time will cause the tire deviation and other faults.Finally, the cost of repairing the car will be higher than replacing a shock absorber. 3、If the broke shock absorber is not replaced for a long time, it will also affect the ride comfort, increase the driving safety risk and cause potential danger.Important Points➡️before Placing an Order, Be Sure to Check the Compatibility and Confirm That This Part Is Suitable for Your Vehicle.➡️ to Confirm, Please Select a Vehicle from the "My Garage" List or Enter Your Vehicle Details Above to Ensure That Your Model Is Included in the Compatibility Table.➡️ if You Encounter the Problem That You Can't Confirm Whether the Model Is Suitable, Please Contact Me. I Can Quickly Answer the Adaptability Problem for You. Thank You for Your Cooperation and Support!Note✅ Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date.✅ Please Check the Manul of Your Vechicle and Choose the Correct Good.✅ If You Are Not Sure the Which Socket Your Vehicle Need.✅ Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need.✅ If You Have Any Questions, Please Do Contact Us.thank You! Item SpecificsBrandUnbrandedFitment TypeDirect ReplacementInterchange Part Number172653 172654 532653 532654, driver passenger side, front left right strut with coil spring, 2017 2018, Limited SE SEL 3.5L, front struts complete assembly, spring strut, complete strut kit, struts front pair, strut assembly, front suspension struts kit, front quick complete strut coil spring assembly, replacement strut assembly front struts complete, quick struts complete assembly frontSurface FinishBrand NewItems IncludedCoil Spring, StrutCountry/Region of ShippingUSATypeStrut & Spring AssemblyFeatures100% Accuracy of Fit, Easy to ReplaceManufacturer Part Number172653_172654OE/OEM Part Number172653 172654Manufacturer Warranty10 YearUPCDoes not applyBundle DescriptionKit Includes: (2) Front Struts w/ Coil SpringCustom BundleYesPlacement on VehicleFront, Left, RightNote 1US WAREHOUSENote 2LIFETIME WARRANTYNote 3FAST & FREE SHIPPINGNote 4DURABLE & BRAND NEW Payment Shipping Returns Contact Us Five-Star PayPal only! 1.We only accept Paypal. 2.We send all the items are based on your paypal address. 3.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment. We only ship this item to United States ! 1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number. 2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days. 4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible. 5. We are located in areas such as NJ, CA, TX, etc. If you send email to us,In our working hours will be resumed within 48 hours. Please feel free to contact us if you have any questions: Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store. * (1)Not receive in time;* (2)Item broken;* (3)Not satisfied with the item...Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please! ❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!✅(YES) Please give us Five-star! Have Question or Problem??Step 1: Contact sellerStep 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!Step 3: Describe your question clearly; we will give you the best solutionPlease leave five stars positive feedback positive comment and Five-Stars. * We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction! * Feedback is very important to us. * We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction. * If we don't understand these problems, we won't be able to solve them! * After understanding the problem, we will be able to give you a satisfactory answer!It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service! Your comment is very important in our business success On May 22, 2023 at 09:19:10 PDT, seller added the following information: New productFor 2001-10 Chrysler PT Cruiser 2 Front Complete Springs Struts + 2 Rear ShocksUSD169.0Pair Rear Shock Absorbers For 2012-2016 2017 2018 Ford Focus 1.0L 2.0L 2.3L 5645USD44.99Pair For 2010 2011 2012 Ford Fusion Mercury Milan MKZ Front Struts w/Coil SpringUSD105.894WD Front Struts w/ Coil Spring Assembly for Nissan Titan Armada Infiniti QX56USD166.1Pair (2) Front Struts w/ Coil Spring Assembly for 2001 - 2007 Toyota SequoiaUSD113.99Front Strut Complete Assembly for 2003 2004 2005 Honda Civic 1.7L - Left & RightUSD158.99Complete Front Left Right Struts Coil Spring Assembly for Volvo C70 C30 V50 S40USD108.99for Buick Enclave Chevy Traverse GMC Acadia Saturn Outlook Shock Absorbers RearUSD39.992x Rear Shocks for Buick Enclave 2008-2017 Chevrolet Traverse 09-17Arcadia 07-16USD39.99Pair Set Front Complete Struts with Coil Spring for 2009 - 2019 Dodge Journey V6USD181.93On Jul 21, 2024 at 20:17:48 PDT, seller added the following information:
Price: 122.99 USD
Location: Texas
End Time: 2025-01-02T01:10:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: Unbranded
Fitment Type: Direct Replacement
Interchange Part Number: 172653 172654 532653 532654, driver passenger side, front left right strut with coil spring, 2017 2018, Limited SE SEL 3.5L, front struts complete assembly, spring strut, complete strut kit, struts front pair, strut assembly, front suspension struts kit, front quick complete strut coil spring assembly, replacement strut assembly front struts complete, quick struts complete assembly front
Surface Finish: Brand New
Items Included: Coil Spring, Strut
Country/Region of Shipping: USA
Type: Strut & Spring Assembly
Features: 100% Accuracy of Fit, Easy to Replace
Manufacturer Part Number: 172653_172654
OE/OEM Part Number: 172653 172654
Manufacturer Warranty: 10 Year
UPC: Does not apply
Bundle Description: Kit Includes: (2) Front Struts w/ Coil Spring
Custom Bundle: Yes
Placement on Vehicle: Front, Left, Right
Note 1: US WAREHOUSE
Note 2: LIFETIME WARRANTY
Note 3: FAST & FREE SHIPPING
Note 4: DURABLE & BRAND NEW
