Description: JL Audio JD500/1 500 Watt Class D Mono Channel Subwoofer Amplifier Monoblock Class D Subwoofer Amplifier, 500 W x 1 @ 2 Ω / 250 W x 1 @ 4 Ω - 14.4VDesigned to produce a whopping 500 watts into 2 ohms (14.4V, 1% THD), the JD500/1 amplifier is a great solution for powering subwoofers in a cost-conscious system. Our proprietary NexD™ switching technology delivers large amounts of real-world power output with excellent efficiency and ultra-low distortion. The JD500/1’s controls are located on the input panel. while the power and speaker connections can be found along the opposite end of its extruded aluminium chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balanced inputs are also on-hand, capable of accepting line-level and speaker-level signals. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier. The JD500/1 is also equipped with an onboard LED-clipping indicator ring, surrounding the input sensitivity control. This useful feature lets you set your amplifier’s input sensitivity, quickly and accurately, without special equipment. With the addition of an RBC-1 remote level control (sold separately), you can control the subwoofer level from the driver’s seat. Rated Continuous (RMS) Power @ 14.4 V@ 4 Ω250 W RMS x 1@ 3 Ω350 W RMS x 1@ 2 Ω500 W RMS x 1@ 1.5 ΩN/ARated Continuous (RMS) Power @ 12.5 V@ 4 Ω225 W RMS x 1@ 3 Ω300 W RMS x 1@ 2 Ω400 W RMS x 1@ 1.5 ΩN/AGeneral SpecificationsFrequency Response 7 Hz - 500 Hz (+0, -1dB)S/N Ratio, referred to highest rated power >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)S/N Ratio, referred to 1 W >60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)Damping Factor @ 4 Ω>1000 / 50 HzDamping Factor @ 2 Ω>500 / 50 HzTHD+N @ Rated Power <1% @ 2 Ω per Ch.Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)Min.Copper Power / Ground Wire Gauge 4 AWG wireFuse Rating 50 A (AFS, AGU or MaxiFuse™)Signal ProcessingFilter Mode(s) Low-Pass onlyFilter Slope(s) 12 dB/octaveFilter Frequency Range50 Hz - 500 HzDetented, Calibrated Filter Freq. Potentiometer NoFilter Defeat Function NoInfrasonic Filter NoBass Boost EQ YesOutput Polarity Switch NoRemote Subwoofer Level Control Optional (RBC-1)Remote Bass EQ Boost Control NoPass-Through Preamp Output BufferedPhysical SpecificationsHeight (H) - 2.10 in / 53 mmWidth (W) - 9.50 in / 242 mmDepth (D) - 7.50 in / 190 mmFREE DELIVERY ON THIS ITEM TO ALL UK MAINLAND ADDRESSES. Please note: Unless otherwise indicated, delivery to the Non-UK mainland postcodes will incur an additional surcharge of +£10. This includes the following areas: Jersey, Guernsey, Isle of Man, Isle of Wight, N. Ireland, Shetlands. Please add £10 to your PayPal payment to avoid shipping delays.
Price: 319 GBP
Location: Oxford
End Time: 2025-01-21T13:35:56.000Z
Shipping Cost: 56.83 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Amplifier Type: Mono
Number Of Channels: 1-Channel
Channels: Mono (1 Channel)
Colour: Silver
Features: Bass Boost, Audio
Manufacturer Part Number: JD500/1
Brand: JL Audio
Impedance: 4 Ω
RMS Power: 500 W