Mares Quad Air with LED Tank Module

Description: Mares Quad Air with LED Tank ModuleSKU: MRSQACMfr. Part: 495123 Item IncludesMares Quad Air Wrist Computer - LED Tank Module DescriptionThe innovative Mares Quad Air Wrist Dive Computer is a step-up from the Quad, able to read the tank's pressure, it receives data directly from the dive tank via a wireless transmitter. Also includes a magnificently clear display, w/jumbo size information, 3-row layout & 4-buttons for intuitive use! 3-row layout comprises all relevant data including tank pressure w/optional transmitter. Two customizable fields for ancillary information. Mirrored button function during dive, option to view dive time including seconds & a runaway deco alarm. Computer has a multi-gas capability, decompression dive planner w/user adjustable surface interval & a long battery life, that is user replaceable. The functions of the Quad Air computer can be grouped into 3-categories, each corresponding to a specific mode of operation. Surface mode: Quad Air is dry on the surface. You can change settings, review logbook, use the dive planner, see remaining desaturation after a dive, download to PC & much more. Dive mode: Quad Air monitors depth, time, tank pressure (optional), temperature & performs all decompression calculations; dive mode itself can be broken down into 4 sub categories: - pre-dive (Quad Air is on the surface but actively monitoring ambient pressure, so that it can begin to calculate a dive the instant it is submerged below 4'/2 meters); - dive - surfacing (Quad Air is on the surface at the end of a dive; dive time calculation is halted but if the diver submerges within 3-minutes the dive is resumed including the time spent on the surface); - post-dive (after the 3-minutes of surfacing mode, Quad Air closes the logbook & reverts to a display showing desaturation time, no-fly time & surface interval; this lasts until the desaturation & the no-fly time both have been reduced to zero). Sleep mode: the computer is on the surface after 1 minute without operation (3 minutes from pre-dive mode). Though the computer appears to be turned off completely, it is still active. Quad Air computes tissue desaturation & checks the ambient pressure once every 20 seconds for uninterrupted monitoring of the environment. Quad Air, operating altitude with decompression sea level to approximately 12,100' (3700m) - without decompression (gauge mode) at any altitude. Decompression model: RGBM Mares-Wienke (10 tissues). Depth measurement: - Max displayed depth: 492' (150m) - Resolution: In feet is always 1' (0.30m). From 0.1m until 99.9m & 1m at depth deeper than 100m. Resolution - Temperature compensation of the measurement between 14F to 122F (-10C to +50C) - Accuracy from 0 to 262' (0 to 80m): 1% 1' (0.2 meters) Temperature measurement: - Measurement range: 14 F to 122F (-10C to +50C) - Resolution: 1F (1C) - Accuracy: 4F ( 2C). Clock: quartz clock, time, date, dive time display up to 99 minutes. Oxygen concentration: adjustable between 21% & 99%, ppO2 max range between 17.4 psi & 23.2 psi (1.2 and 1.6 bar). Logbook memory: 35 hours of dive profile at 5-second sampling rate. Operating temperature: 14F to 122F (-10C to +50C). Storage temperature: -4F to 158F (-20C to 70C). Display: - Diagonal: 2.75" (70 mm) mineral glass. Power supply CR2450 user-replaceable battery with a battery life of 100-150 dives. Actual battery duration depends on the usage of the backlight & the water temperature. For download kit see SKU: MRSPCBL, Mares PC Interface for Blue Link. The LED Tank Module is mounted onto an HP port of the 1'st-stage regulator, and its main function is to transmit tank pressure data via hose-less coded RF protocol to the dive computer. The dive computer then displays the tank pressure & calculates gas consumption rate & time remaining before reaching the reserve value. For this to happen, the tank module & the dive computer must be paired. The LED tank module features also, as the name suggests, an LED on the top of the tank module body. The LED can be used on the surface before a dive to distinguish between a full & an empty tank without needing a dive computer to display the exact value. During a dive the LED blinks when certain pressure levels have been reached & can thus alert your dive buddy or dive guide when you have reached the half tank mark or the tank reserve. The tank module turns on automatically upon pressurization to at least 145 psi (10 bar). It turns off automatically when the pressure drops below 145 psi (10 bar). To save battery power, the tank module turns itself off also when the pressure does not change over more than 4 minutes. This prevents unnecessary battery consumption in case of a pressure check well ahead of a dive with the tank left open afterwards, or in case the tank is not closed, & the first stage purged immediately after a dive, or in the case of stage tanks that are left pressurized during the dive even when not in use. The tank module turns itself on again when a difference of pressure of more than 14.5 psi (1 bar) is sensed. Upon pressurizing the tank module, if a pressure of 2600 psi (180 bar) or more is sensed, the LED will blink 10 times in Green color in 4-second intervals. The value of 2600 psi (180 bar) can be set by the user via Android app*. For battery preservation, the LED turns off after the surface check & stays off until a pressure of 1450 psi (100 bar) is reached (half tank warning). At that point it blinks in yellow color once every 4 seconds. Once the tank pressure reaches 725 psi (50 bar) the LED blinks in RED color once every second (tank reserve). The values of 1450 psi (100 bar) & 725 psi (50 bar) can be set by the user via Android app*. The LED can also be activated to blink permanently with Green color for night dives. This is set by the user via Android app*. The Android app* allows the user to perform also the following: - Read the device ID - Read the firmware version - Read the battery voltage - Perform firmware upgrades. Transmitter is powered by a CR123A user-replaceable battery - Battery life: 150-200 dives. Air Integrated computerized monitoring of tank pressure is used to determine a bottom time which depends not only on your depth, but also on your actual gas consumption, increasing your dive safety. In addition, the gas consumption (referred to the surface) is displayed on the computer for more control over your dive. The computer does this via the HP Transmitter attached to your first stage regulator by sampling the pressure drop over time & giving you the rate of consumption in minutes remaining. If the time remaining is greater than the no-decompression limit for your depth it will display the shorter time allowed. For Download Interface See Mares PC Interface for Dive Link 2 (SKU: MRSPCDL2). *App available for Android only, as iOS does not make NFC communication available for common uses.FeaturesMares Quad Wrist Computer with LED Tank Module:Wealth of Great Features! Mares Latest Dive ComputerMagnificently Clear, Super User-Friendly DesignClear Display with Jumbo Size InformationTwo Customizable Fields for Ancillary Information4-Buttons for Intuitive User InterfaceMirrored Button Function During DiveOption to View Dive Time Including Seconds, Great for Safety StopsRunaway Decompression AlarmDecompression Dive Planner w/User Adjustable Surface IntervalUser Replaceable CR2450 BatterySoftware Upgradeability, Ready to Grow w/YouSegment Display, Provides Needle-Sharp InformationIntelligent Placement of Information for Easiest ReadabilityMineral Glass Display: Tempered Glass Superior Scratch Resistance Improved Readability in All Diving Conditions & Viewing AnglesGas Switching:One or More Oxygen Enriched - Gases (up to 99%) Switching Gases During the Dive Benefit from Shorter Decompression TimesMaximum Depth Display: 492' (150m)Memory Capacity: 38 HoursImperial or Metric Units of MeasureSet for Fresh or Saltwater DivingStopwatch, Power Indicator & Plan Mode FunctionsResidual Nitrogen Reset, Audio and Visual Alarms, Ascent Rate FunctionsAltitude Adjustable to 12,100' (3,700m)Algorithm: RGBM Mare-WienkeClock: Quartz, Time & Date12 or 24-Hour FormatBack Light Function for Diving In-Low-Light-ConditionsAir, Nitrox or Bottom Timer DeviceDive Mode: Current Depth, Maximum Depth Stopwatch, Dive Time & Temperature Ascending; Ascent Speed in Feet or Meters per MinuteDownload/Upload Options for PC or MAC ComputersDurable Rubber Wrist BandLED Tank Module:Transmit Tank Pressure Data via Hose-Less Coded RF ProtocolLED On Top of Tank Module BodyLED Functions: Surface Mode; Distinguish Full/Empty Tank w/o Dive Computer Display Exact Value During Dive; LED Blinks at Certain Pressure Levels Alert Dive Buddy/Guide w/Half Tank or Reserve ReachedLED Functions (Colors): 2600 psi (180 bar) or More, Blink 10 Times in Green Color 1450 psi (100 bar) 1/2-Tank Warning, Blinks in Yellow Green/Yellow Blinks in 4-Second Intervals 725 psi (50 bar) LED Blinks in Red Color Once Every SecondOptional LED Functions: Requires Android app* Change Pressure/LED Color Function Blink Permanently w/Green Color for Night Dives Read Device ID Read Firmware Version Read Battery VoltagePerform Firmware UpgradesTransmits Cylinder Information to Computer ScreenProvides Pressure Display: 0 to 5,000 psi (0 to 350 bars)Eliminates Pressure Gauge HoseStreamlines Your Diving ProfileGives Gas Time RemainingIncreased Dive SafetyPower User Replaceable CR123 BatteryBattery Life: 150-200 DivesSpecificationsComputer:----AlgorithmMares-Wienke RGBM (Reduced Gradient Bubbles Model) AlgorithmFresh/Salt WaterYesAudible AlarmsYesDepth Display492' (150m)Altitude AdjustableUp to 12,100' (3,700m)Operating ModesAir, Nitrox & Bottom TimerBack LightYesMemory Capacity38-HoursTime, Date & TemperatureYesImperial/Metric DisplayYesPowerComputer: User-Replaceable CR 2450 Lithium-Ion Battery Transmitter: User Replaceable CR123 BatteryAir IntegratedOptional Wireless Transmitter (see SKU: MRSQT)UpgradableYesTransmitter:----Pressure Display0 to 5000 psi (0 to 350 bars)Attachment7/16" Threaded HP PortLED FunctionsYes, Pressure ReadingsLED Colors2600 psi (180 bar) or More, Green Color 1450 psi (100 bar) 1/2-Tank Warning, Yellow 725 psi (50 bar) RedColor/Blink DurationsInitial Pressurization; 2600 psi (180 bar) or More Blink 10 Times in Green Color Green/Yellow Blinks in 4-Second Intervals 725 psi (50 bar) LED Blinks in Red Color Once Every Second Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty & respect. If you feel like you have a reason to leave neutral or negative feedback, please contact us beforehand, Im sure we can work it out. Please contact us using the ASK A QUESTION link found at the bottom of the page. About us Many years ago Scuba was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service. Contact Us Got a question? Please contact us using the ASK A QUESTION link found at the bottom of the page Hours: Mon-Thu: 9:30-5:30, Friday: 9:30-12:30 Relist Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request. Item availability We will only post items that are in stock, ready to ship. Payment / Shipping Payment Items can be returned within 30 Days of purchase, and must be returned in original packaging, pending a return authorization. Shipping Most purchases are shipped within 1 day of payment. We will not ship outside of the USA. We supply tracking information 24 hours after the shipment leaves our warehouse. Please check your email and/or Ebay messages & make sure our email doesnt go into spam or junk. No store pick-ups for Ebay items. We will not mark any package as a gift. We do not ship to PO boxes. We ship to APO or FPO addresses, please contact us for more information. Tracking There is no need to email us for tracking info. You will get that automatically. Returns We think you'll agree that Scuba has the best return policy in the industry. You have 60 days from the date of invoice to return the merchandise for full refund. Inspect the equipment when it arrives, and if you're not fully satisfied you can return it for a full refund (less the shipping charge) as long as you haven't used it. We won't even ask why you've changed your mind. You'll need the original manufacturers labeled packaging with all materials, manuals and blank warranty cards. Books, CDs, DVDs may not be returned (due to copyright laws). Sorry. Merchandise returned in used condition or not in its original packaging may be refused, and the carrier will charge you freight in both directions. Please allow 2 days from the date we received the package for us to process your return. ate we received the package for us to process your return.

Price: 411.88 USD

Location: Elizabeth, New Jersey

End Time: 2024-12-02T11:43:25.000Z

Shipping Cost: N/A USD