Multi-Code 3089 MultiCode 308911 Linear MCS308911 Garage Gate Remote 300m 1/2Pcs

Description: CONTENTS These remotes are very small (2" x 1-1/2" x 1/2") key-chain style remote operating at 300 MHz. It achieves its small size by using state-of-the-art components. It has been designed for use with MultiCode 10 dip-switch receivers. COMPATIBLE REMOTES Multi-Code: 1089, 3060, 3060-01, 3070-01, 3083, 3083-01, 3089, 3089-11, 4120, 4120-01, 4140 & 4140-01, Linear: MCS308911, MCS412001, MCS414001, MCS306001, MCS307001, MCS308301, and MCS420001 Digi Code: 5010, 5030, 5040, 5060, and 5070 Eagle: EG 140, EG 144, EG 148 AND EG 152 Compact Size: Say goodbye to the old and bulky remotes and use this portable mini remote with keychain. It doesn't matter if you carry it around or put it in the car. Single remote control size: 2.2'' x 1.6'' x 0.6'' It is NOT a universal remote control, please make sure your garage door opener system is ''300MHz Multi-Code'' or this remote will not work. Compatible with all US Multi-Code 300MHz frequency garage door or gate opener systems. Replaces Multi-Code Remote models: 3089/ 3060/ 3070/ 4120 Same function as Linear Multi-Code remote product number MCS308911. Equipped with 10 binary DIP switches. ABS plastic shell, silicone button. DIP Switches Type 1 DIP Switches Type 1 If the type of the DIP Switches of your opener has only two positions, "+" or "-" ("on" or "off"), as shown in the figure above. Dial the DIP Switches (from "1" to "10") of our remote control to the same position as the DIP Switches on your original remote control or opener main board.T Test and check. TIPS: Normally, you only need to set the DIP Switches of our remote control to the same position as your original remote control, from "1" to "10". If this doesn't work, please try to set it to the opposite position to your original remote control. For example, if the original remote control at switch "1" is "+", then set it to "-" on our remote control, and so on, until all 10 DIP Switches are set. DIP Switches Type 2 DIP Switches Type 2 If the type of the DIP Switches of your opener has three positions, "+", "0" or "-" ("on", "0" or "off"), as shown in the figure above. 1, Change the settings of DIP Switches on your opener main board. Only two positions of "+" or "-" ("on" or "off") can be used, and "0" cannot be used at any DIP Switch. 2. Dial the DIP Switches (from "1" to "10") of our remote control to the same position as the DIP Switches on the opener main board you just set. 3. Test and check. TIPS: Normally, you only need to set the DIP Switches of our remote control to the same position as your original remote control, from switch "1" to "10". If this doesn't work, please try to set it to the opposite position to your original remote control. For example, if the original remote control at switch "1" is "+", then set it to "-" on our remote control, and so on, until all 10 DIP Switches are set. The package includes: Remote control Keychain 23A 12V alkaline battery (installed) English manual

Price: 16.9 USD

Location: Rowland Heights, California

End Time: 2025-01-30T19:30:46.000Z

Shipping Cost: 0 USD