NanoVNA-F 50k-3G V2 Vector Network Analyzer 4.3" HF VHF UHF Antenna Analyzer

Description: Graphic details： Nanovna v2 portable vector network analyzer is based on OwOComm's S-A-A-2 design, a new generation of products developed with a large performance upgrade, the measurement range is extended to 50KHz-3000MHz, the dynamic range is larger, has reached 80db, can be used to debug the UV frequency of the duplexer, more accurate, more practical simple, flexible and fast operation interface. This small Wing Net instantly kills the performance of all versions of this NanoVNA series on the market. The standing wave of the antenna can be tested Impedance The insertion loss of the filter can also be tested Isolation Standing wave The attenuation of the cable can also be tested The shortening factor Phase The magnification of the antenna amplifier can also be tested It also has the function of frequency meter It can also measure the length of the cable The group delay is powerful, and the most important thing is that it can also debug the duplexer of the UV frequency range, which is highly recommended and can kill any other version of NanoVNA on the market. Highly recommended!! Product Performance: 1. Measuring frequency range: 50KHz-3000MHz; 2. RF output power: -9dbm (error within 1GHz: plus or minus 1db); 3. Frequency accuracy: < 0.5ppm 4.S21 dynamic range: 70dB(1.5GHz),60dB(3GHz) 5.S11 Dynamic Range: 50dB(1.5GHz),40dB(3GHz) 6.2 Port Return Loss: 20dB typ (1.5GHz), 13dB min (3GHz) 7.USB Interface: USB Type-C Communication Mode: CDC (Serial) 8. Number of calibration points: 101 points 9. Number of scan points: 101 points 10. Show trace: 4 traces 11. Marker: 4 mark points (mark bar can be moved up and down the screen) 12. Set to save: 5 (after saving, it can be directly called the next time it is turned on and used, no need to recalibrate it, and the saved parameters before the last shutdown will be automatically called when the next time it is turned on) 13. Scan time: about 1.9s/1 time (50kHz ~ 3000MHz full band) 14. Measurable S parameters, VSWR SWR Smith chart phase diagram, group delay ,......; 15.4.3 inch IPS LCD screen, IPS TFT (800x480) viewing angle is close to 180°, long-term use does not hurt the eyes; 16. The aluminum alloy chassis is used to effectively shield electromagnetic interference, making the S21 better than 80dB dynamic range within 1GHz 17. Compact design, body size 125mm*75mm*20mm, small and portable; 18. The RF interface is SMA, which is convenient for connecting all kinds of DUTs; 19. Using 5000mAh ultra-large capacity lithium battery, the battery life can reach 7 hours; 20. Full touch screen design, support 3 side buttons at the same time, flexible and convenient operation; 21. Support Chinese and English menu switching; 22. Support screen brightness adjustment; 23. Upgrade the firmware through a virtual U disk, no programmer is required, only a USB cable is needed to upgrade the firmware; 22. Expand a USB power output interface, 5V/1A output (can be used as a power bank); 24. Using high-current 2A charging IC, the charging time is shorter; 25. Support host computer, you can use the computer as the display operation interface; 26. With plastic box weight: 400g NanoVNA-F 4.3" V2 comes standard with 1: USB Type-C cable x1 20CM SMA Male to Male RG316 RF Cable x2 SMA Male Calibration Bracket - Open x1 SMA Male Calibration Bracket - Short Circuit x1 SMA Male Calibration Bracket - Load x1 SMA-JJ Male to Male Connector x1 SMA-KK Female-to-Female Connector x1 SMA-JKW Male to Female Right Angle Connector x1

Price: 109.29 USD

Location: 深圳, Guangdong

End Time: 2025-02-03T02:27:38.000Z

Shipping Cost: 0 USD