OWC 1.0TB SSD Upgrade Bundle for 2012-2019 27" iMacs with a Fusion Drive

Description: OWC 1.0TB SSD Upgrade Bundle for 2012-2019 27" iMacs with a Fusion Drive Complete DIY kit for upgrading your 2012-2019 27" iMacs hard drive with a high-performance OWC 6G Solid State Drive; No software hacks required SEQUENTIAL READ (MAX): Up to 540 MB/s; SEQUENTIAL WRITE (MAX): Up to 500 MB/s CAPACITY: 1000GB Useable Capacity, TOTAL FLASH MEMORY COMPONENTS: 1024GB, FORM FACTOR: 2.5-inch 7mm; STORAGE INTERFACE: SATA 6.0 Gb/s Compatible with 2012-2019 27-inch iMac. NOTE: Mercury Electra 6G SSDs can only be installed in 27-inch iMac models that came with a factory-installed HDD or Fusion drive. Solid-State Drive (SSD) only machines can be upgraded with an Aura Pro X2 SSD (Late 2013 - 2019) or Aura 6G SSD (Late 2012). Backed by free DIY install videos and expert support; Includes: (1) OWC Mercury 6G SSD, (1) AdaptaDrive 2.5" to 3.5" Drive Converter Bracket, (1) In-line digital thermal sensor cable, (2) 2.25" suction cup, (1) Torx T10s driver, (1) Torx T8s driver, (1) Adhesive strip set, (1) Nylon pry tool (spudger), (1) Screen removal tool, (1) Microfiber scratch-free cloth, AdaptaDrive Assembly Manual & User Guide, 3 Year OWC Limited Warranty Complete DIY kit for upgrading your late 2012 or later 27" iMacs hard drive Mercury Electra SSD and iMac HDD Kit Experience the extreme performance of an OWC SSD upgrade with this easy DIY SSD and hard drive replacement kit. Add an SSD to your hard drive equipped iMac to experience faster booting, near instant application launches and data transfer speeds up over 500 MB/s. Important Installation Note: Leaving original adhesive or other foreign material on the display glass or chassis may result in a poor bond, causing the glass to disconnect from the chassis. Remove any adhesive residue or other foreign material from the display glass and chassis before re-assembling the iMac. Avoid adjusting the screen during re-assembly. Adjusting the screen during re-assembly may result in a poor bond, causing the glass to disconnect from the chassis. Allow adhesive to cure for 20 minutes before standing the iMac upright. Includes (1) OWC Mercury 6G SSD(1) AdaptaDrive 2.5" to 3.5" Drive Converter Bracket(1) OWC In-line Digital Thermal Sensor Cable(2) OWC 2-1/4" Suction Cup(1) Torx T10 driver(1) Torx T8 driver(1) 27" iMac Adhesive tape set for proper display resealing(1) Nylon Pry Tool (Spudger)(1) OWC Screen Removal Tool(1) OWC Blue Microfiber Screen Cleaning Cloth Upgrade Your iMac with Confidence OWCs in-line solution is the only hardware digital thermal sensor on the market allowing a third-party SATA drive to be installed in your iMac. A convenient, plug-and-play cable, the In-line Digital Thermal Sensor eliminates fan noise and maintains proper system fan control through the iMacs System Management Controller. This innovative device is designed specifically for the iMac, requires no software hacks and ensures compatibility with Apples built-in diagnostic processes. Fast and reliable solid-state storage Delivering the latest in flash NAND and controller technology, utilizing SLC and 3D NAND for long-lasting, power-efficient performance, the OWC Mercury 6G SSD line offers a powerful combination of performance and reliability for demanding everyday computer users.

Price: 137.99 USD

Location: Woodstock, IL

End Time: 2024-12-14T20:13:33.000Z

Shipping Cost: 0 USD